Canon HG-100TBR Tripod Grip: Setup Guide for Hybrid Shooting

By Camera Wholesalers | Published: 2026-10-26

Category: How-to Guides

Learn how to set up and use the Canon HG-100TBR Tripod Grip for select EOS M and PowerShot G cameras. This guide covers attaching the grip, pairing the BR-E1 remote, and switching between handheld and tripod modes.

Quick Answer

The Canon HG-100TBR Tripod Grip serves as both a handheld camera grip and a fold-out mini tripod for select EOS M and PowerShot G cameras. Follow the steps below to set it up, pair the included BR-E1 wireless remote, and switch between shooting modes.

Why Choose the HG-100TBR Over a Standard Tripod

A standard tripod is bulky and not always practical for casual shooting. The HG-100TBR's hybrid design lets you keep a secure grip on your camera while also providing a stable tabletop platform for long exposures or group shots. The tilting head adds flexibility for low-angle or overhead compositions.

HG-100TBR Setup Steps

1. Attach the Grip to Your Camera: Align the 1/4"-20 screw on the bottom of the grip with your camera's tripod socket and tighten the knob. Ensure the grip is oriented so the fold-out legs face away from the lens. Common mistake: Overtightening can strip the socket. Tighten until snug, then stop.
2. Pair the BR-E1 Wireless Remote: Insert the CR2032 battery into the remote (check polarity). On your camera, navigate to the Bluetooth settings menu and select 'Register a remote'. Press the remote's pairing button until the LED blinks. Confirm the pairing on the camera screen. Checkpoint: If pairing fails, ensure the remote is within 16 feet (5 meters) and no other Bluetooth device is connected to the camera.
3. Switch Between Handheld and Tripod Mode: For handheld use, keep the legs folded against the grip. For tabletop tripod mode, pull the legs outward until they click into place. Adjust the tilting head to your desired angle by loosening the side knob, then retighten. Common mistake: Using tripod mode on uneven surfaces with the head fully tilted can cause instability. Keep the head level when possible.
4. Use the Remote for Shutter Release: After pairing, press the remote's shutter button halfway to focus, then fully to capture. The remote works in both handheld and tripod modes. Checkpoint: The remote has a range of about 16 feet (5 meters). Test it before shooting critical moments.
5. Detach and Store the Grip: Loosen the 1/4"-20 knob to remove the grip. Fold the legs flat and store the remote in a safe place. The grip is compact enough to fit in most camera bags.

Product Details

Canon HG-100TBR Tripod Grip: The HG-100TBR includes a BR-E1 wireless remote control and attaches via a 1/4"-20 mount. You can trigger the shutter remotely without touching the camera, reducing shake in long exposures or time-lapses.
Canon HG-100TBR Tripod Grip