What the Delta 1 Brightlab Safelight Does
The Delta 1 Brightlab Universal Red Jumbo Safelight is a large, bulb-type safelight designed for darkroom use. It works with blue-sensitive, litho orthochromatic, and diffusion transfer materials, as well as contact duplicating and standard photographic materials. Its red output helps you handle these materials without fogging them.
Product Facts
- Delta 1 Brightlab Universal Red Jumbo Safelight 25 Watt: The Delta 1 Brightlab Jumbo Red Safelight uses a standard Edison base screw mount that fits most household female Edison sockets. You can screw it into any common light socket, no special adapter required.

Delta 1 Brightlab Universal Red Jumbo Safelight 25 Watt - Delta 1 Brightlab Universal Red Jumbo Safelight 25 Watt: It is intended for standard photographic and litho orthocromatic materials, contact duplicating, and diffusion transfer materials. This confirms the safelight is safe for those specific emulsions, so you can work confidently.
- Delta 1 Brightlab Universal Red Jumbo Safelight 25 Watt: The safelight is rated at 25 watts. The low wattage keeps the light dim enough to protect sensitive materials while still providing visibility.
Setting Up the Safelight
Follow these steps to get the Delta 1 Brightlab Safelight working in your darkroom.
- Choose a compatible socket: The safelight has a standard Edison base, so it fits any female Edison socket (the common screw-in type found in most household lamps and ceiling fixtures).
- Install the safelight: Screw the safelight into the socket until snug. Do not overtighten.
- Position the safelight: Place it so it illuminates your work area without shining directly onto your sensitive materials. Follow your material's instructions for safe distance.
- Test with your materials: Before processing valuable work, do a simple fogging test: place a piece of your material in the safelight's working area for several minutes, then develop it normally. If it shows no fog, the safelight is safe to use.
Compatibility Notes
The Delta 1 Brightlab Safelight is specifically designed for blue-sensitive, litho orthochromatic, and diffusion transfer materials, as well as contact duplicating and standard photographic materials. If you work with panchromatic or other high-sensitivity materials, this safelight is not suitable. Always check your material's safelight recommendations before use.


