Start by confirming your camera is on the list
The Sony RM-VPR1 Remote Commander is a wired remote for select Sony cameras and camcorders. Before you buy or connect one, match your exact model against the supplied compatibility lists below. The RM-VPR1 is not a universal remote: some cameras get full shutter, zoom, and bulb control, while others support only the shutter release, and a few action cams support only specific buttons.
Once you have confirmed your model, setup is straightforward: connect the correct included cable between the remote and your camera, then use the remote's controls to trigger the shutter or zoom without touching the camera body. That separation is the whole point—it helps eliminate camera shake and makes self-portraits and long-exposure work easier.
What the RM-VPR1 includes and what it controls
- Sony RM-VPR1 Remote Commander with Multi-Terminal Cable: Wired remote control with shutter and zoom control plus bulb function. These are the core features you will use during setup and shooting; confirm your camera supports the functions you need.

Sony RM-VPR1 Remote Commander with Multi-Terminal Cable - Sony RM-VPR1 Remote Commander with Multi-Terminal Cable: Both a Multi-Terminal cable and a remote terminal cable are included. The two cables exist because different Sony camera families use different ports—you will use the one that matches your camera.
- Sony RM-VPR1 Remote Commander with Multi-Terminal Cable: Cable length: 31.5". This is the supplied cable length; plan your shooting position around it rather than assuming you can stand farther away.
Match the cable to your camera family
The RM-VPR1 ships with two cables because Sony's camera families do not share a single remote port. Use the Multi-Terminal cable for cameras equipped with Sony's Multi-Terminal interface, and the remote terminal cable for models that use the older remote terminal. The supplied compatibility lists are organized by camera family, so find your model first, then use the cable associated with that family.
If your model appears in the full-function lists—such as the E-Mount mirrorless group (a1, a9 II, a9, a7R IV, a7R III, a7R II, a7R, a7s III, a7S II, a7S, a7 III, a7 II, a7, a6600, a6500, a6400, a6300, a6000, a5100, a5000, a3500, a3000, ILCE-QX1) or the A-Mount full-function group (a99 II, a77 II, a68, a58)—you can expect shutter, zoom, and bulb control as described. For compact cameras, camcorders, action cams, and digital recording binoculars, check the specific notes, because support varies by model.
Compatibility by camera family: what each group supports
The supplied compatibility evidence groups Sony cameras by the functions the RM-VPR1 can control. Use this table to find your model's group before connecting.
- E-Mount mirrorless and A-Mount SLR (full function): E-Mount: a1, a9 II, a9, a7R IV, a7R III, a7R II, a7R, a7s III, a7S II, a7S, a7 III, a7 II, a7, a6600, a6500, a6400, a6300, a6000, a5100, a5000, a3500, a3000, ILCE-QX1. A-Mount full function: a99 II, a77 II, a68, a58. These support shutter, zoom, and bulb control as described.
- A-Mount SLR (shutter release only): a99, a77, a65, a57, a55, a37, a35, a33, A900, A850, A700, A580, A560, A550, A500, A450, A350, A300, A200, A100. On these models the remote works as a shutter release only.
- Compact cameras (full function): RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VII, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II, RX0 II, RX0, HX99, HX90V, HX80, HX60V, HX50V, HX400V, HX300, WX500, QX30, ZV-1.
- Camcorders (full function): FDR-AX100, FDR-AX30, FDR-AX33, FDR-AV43, FDR-AX53, FDR-AX700, FDR-AXP35, HDR-CX230, HDR-CX240, HDR-CX320, HDR-CX330, HDR-CX380, HDR-CX405, HDR-CX430V, HDR-CX440, HDR-CX455, HDR-CX480, HDR-CX485, HDR-CX675, HDR-CX900, HDR-GW66V, HDR-GWP88V, HDR-MV1, HDR-PJ220, HDR-PJ230, HDR-PJ270, HDR-PJ275, HDR-PJ340, HDR-PJ350, HDR-PJ380, HDR-PJ430V, HDR-PJ440, HDR-PJ540, HDR-PJ650V, HDR-PJ660V, HDR-PJ670, HDR-PJ675, HDR-PJ790V, HDR-PJ810, HDR-PJ820. Note: on HDR-MV1 the zoom function and release button are not compatible.
- Action cams (limited support): FDR-X3000, HDR-AS300, and HDR-AS50: release button not supported. HDR-AZ1: only Start/Stop and Power buttons supported.
- Digital recording binoculars: DEV-30, DEV-50V.
How to set up the RM-VPR1: a practical sequence
The supplied record does not include a manufacturer step-by-step procedure, so the sequence below is a practical starting point based on the included cables and the remote's stated functions. Treat it as a checklist, not a substitute for your camera's manual.
- Confirm your exact model in the compatibility lists: Write down your camera model and find it in the lists above. Note whether it supports full function, shutter release only, or limited buttons. This determines what you can expect from the remote.
- Choose the correct included cable: Use the Multi-Terminal cable for cameras with Sony's Multi-Terminal port, or the remote terminal cable for models with the older remote terminal. The two cables are not interchangeable.
- Connect the cable between the remote and the camera: Plug one end into the remote and the other into the matching port on your camera. The supplied cable is 31.5" long, so position yourself within that distance.
- Test the shutter release first: Press the shutter button on the remote and confirm the camera focuses and fires. If it does not, recheck the cable connection and your model's compatibility group.
- Test zoom and bulb only if your model supports them: On full-function models, try the zoom control and bulb function. On shutter-release-only models, these controls will not operate—that is a compatibility limit, not a fault.
Using the remote for long exposures and self-portraits
The RM-VPR1's main practical benefit is that you can trigger the camera without touching it, which helps eliminate camera shake. For long exposures, the bulb function is available on models that support it—check the full-function lists above. For self-portraits, the wired remote lets you stand away from the camera and fire the shutter yourself, within the reach of the supplied cable.
Keep expectations aligned with your camera's group: on shutter-release-only models, the remote will fire the shutter but will not control zoom or bulb. On the action cams listed, the release button is not supported, and the HDR-AZ1 supports only Start/Stop and Power buttons. These are supplied compatibility notes, not defects.
Catalog context for the RM-VPR1
- Sony RM-VPR1 Remote Commander with Multi-Terminal Cable: Catalog price: USD 97.47, with a catalog comparison price of USD 149.95. Useful for budgeting, but confirm current pricing at checkout.
- Sony RM-VPR1 Remote Commander with Multi-Terminal Cable: Dedicated to select Sony cameras and camcorders for remote operation without handling the camera. Reinforces that this is a model-specific accessory, not a universal remote.


