Terug naar blog
Handleidingen 2026-11-20 Camera Wholesalers 0 weergaven

Delta 1 Safelight: Darkroom Setup Guide

Delta 1 Safelight: Darkroom Setup Guide

Learn how to set up the Delta 1 Brightlab Jumbo Red Safelight for your darkroom. Covers mounting, material compatibility, and practical tips.

What the Delta 1 Brightlab Safelight Does

The Delta 1 Brightlab Universal Red Jumbo Safelight is a large, bulb-type safelight designed for darkroom use. It works with blue-sensitive, litho orthochromatic, and diffusion transfer materials, as well as contact duplicating and standard photographic materials. Its red output helps you handle these materials without fogging them.

Product Facts

Setting Up the Safelight

Follow these steps to get the Delta 1 Brightlab Safelight working in your darkroom.

  1. Choose a compatible socket: The safelight has a standard Edison base, so it fits any female Edison socket (the common screw-in type found in most household lamps and ceiling fixtures).
  2. Install the safelight: Screw the safelight into the socket until snug. Do not overtighten.
  3. Position the safelight: Place it so it illuminates your work area without shining directly onto your sensitive materials. Follow your material's instructions for safe distance.
  4. Test with your materials: Before processing valuable work, do a simple fogging test: place a piece of your material in the safelight's working area for several minutes, then develop it normally. If it shows no fog, the safelight is safe to use.

Compatibility Notes

The Delta 1 Brightlab Safelight is specifically designed for blue-sensitive, litho orthochromatic, and diffusion transfer materials, as well as contact duplicating and standard photographic materials. If you work with panchromatic or other high-sensitivity materials, this safelight is not suitable. Always check your material's safelight recommendations before use.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel